HTS 7307 · Bangladesh · duty record
Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
Product description (continued): Goods in HTS heading 7307 from Bangladesh pay the general duty in the tariff schedule plus Section 301 10% and Section 232 50%. Across the 39 lines below the percentage total runs from 14.8% to 56.2%. Section 232 is added to the totals only where a plain percentage applies to the line and the country (conditional and country-deal rates are listed, not added), we found no IEEPA duty in force, and antidumping duties are not checked here.
Selected line / duty components
General schedule rate: 4.8%
Of nonmalleable cast iron › For threaded pipe
Click any code in the table below to show that line here.
Duty by line
39 tariff lines · BangladeshPick your own 10-digit code from your classification or broker: the rate that applies to you is the one on your line. The last column is the percentage part only, on $10,000 of customs value.
39 lines shown
| Code | Product | General rate | Added duties | Total percentage | On $10,000 |
|---|---|---|---|---|---|
| Of nonmalleable cast iron › For threaded pipe | 4.8% | 10% Section 301 · adds | 14.8% | $1,480.00 | |
| Of nonmalleable cast iron › For cast-iron soil pipe | 4.8% | 10% Section 301 · adds | 14.8% | $1,480.00 | |
| Of nonmalleable cast iron › Other | 4.8% | 10% Section 301 · adds | 14.8% | $1,480.00 | |
| Ductile fittings › Grooved-end fittings (including grooved couplings) | 5.6% | 50% Section 232 · adds | 55.6% | $5,560.00 | |
| Ductile fittings › Threaded | 5.6% | 50% Section 232 · adds | 55.6% | $5,560.00 | |
| Ductile fittings › With mechanical, push-on (rubber compression) or flanged joints attached | 5.6% | 50% Section 232 · adds | 55.6% | $5,560.00 | |
| Ductile fittings › Other | 5.6% | 50% Section 232 · adds | 55.6% | $5,560.00 | |
| Other › Unions | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Other › Grooved-end fittings (including grooved couplings) | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Other › Threaded | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Other › Other | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Flanges › Not machined, not tooled and not otherwise processed after forging | 3.3% | 50% Section 232 · adds | 53.3% | $5,330.00 | |
| Flanges › Other | 5.6% | 50% Section 232 · adds | 55.6% | $5,560.00 | |
| Threaded elbows, bends and sleeves › Sleeves (couplings) | Free | 50% Section 232 · adds | 50% | $5,000.00 | |
| Threaded elbows, bends and sleeves › Other | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Butt welding fittings › Not machined, not tooled and not otherwise processed after forming | 5% | 50% Section 232 · adds | 55% | $5,500.00 | |
| Butt welding fittings › Other | 5% | 50% Section 232 · adds | 55% | $5,500.00 | |
| Other › Nipples | 5% | 50% Section 232 · adds | 55% | $5,500.00 | |
| Other › Other | 5% | 50% Section 232 · adds | 55% | $5,500.00 | |
| Not machined, not tooled and not otherwise processed after forging › Of iron or nonalloy steel | 3.3% | 50% Section 232 · adds | 53.3% | $5,330.00 | |
| Not machined, not tooled and not otherwise processed after forging › Of alloy steel (except stainless steel) | 3.2% | 50% Section 232 · adds | 53.2% | $5,320.00 | |
| With an inside diameter of less than 360 mm › Of iron or nonalloy steel | 5.5% | 50% Section 232 · adds | 55.5% | $5,550.00 | |
| With an inside diameter of less than 360 mm › Of alloy steel (except stainless steel) | 5.5% | 50% Section 232 · adds | 55.5% | $5,550.00 | |
| With an inside diameter of 360 mm or more › Of iron or nonalloy steel | 5.5% | 50% Section 232 · adds | 55.5% | $5,550.00 | |
| With an inside diameter of 360 mm or more › Of alloy steel (except stainless steel) | 5.5% | 50% Section 232 · adds | 55.5% | $5,550.00 | |
| Sleeves (couplings) › Of iron or nonalloy steel | Free | 50% Section 232 · adds | 50% | $5,000.00 | |
| Sleeves (couplings) › Of alloy steel (except stainless steel) | Free | 50% Section 232 · adds | 50% | $5,000.00 | |
| Threaded elbows, bends and sleeves › Other | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Of iron or nonalloy steel › Not machined, not tooled and not otherwise processed after forging | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| Of iron or nonalloy steel › Other | 6.2% | 50% Section 232 · adds | 56.2% | $5,620.00 | |
| With an inside diameter of less than 360 mm › Of alloy steel (except stainless steel) | 5.5% | 50% Section 232 · adds | 55.5% | $5,550.00 | |
| Of iron or nonalloy steel › Not machined, not tooled and not otherwise processed after forging | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 | |
| Of iron or nonalloy steel › Other | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 | |
| With an inside diameter of 360 mm or more › Of alloy steel (except stainless steel) | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 | |
| Not machined, not tooled and not otherwise processed after forging › Of iron or nonalloy steel | 3.7% | 50% Section 232 · adds | 53.7% | $5,370.00 | |
| Not machined, not tooled and not otherwise processed after forging › Of alloy steel (except stainless steel) | 3.2% | 50% Section 232 · adds | 53.2% | $5,320.00 | |
| Of iron or nonalloy steel › Nipples | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 | |
| Of iron or nonalloy steel › Other | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 | |
| Other › Of alloy steel (except stainless steel) | 4.3% | 50% Section 232 · adds | 54.3% | $5,430.00 |
What is and is not counted
Rules applied to Bangladesh
- 10% Section 301 since 2026-07-24 — source (9903.05.20-9903.05.84 (headings by country))
2026 Section 301 action (91 FR 47318, U.S. note 52): 10% on top of the general rate, from 24 July 2026, for the countries named in headings 9903.05.22, 9903.05.26, 9903.05.28, 9903.05.29, 9903.05.35, 9903.05.37, 9903.05.40, 9903.05.42, 9903.05.44, 9903.05.45, 9903.05.50, 9903.05.54, 9903.05.55, 9903.05.62, 9903.05.72, 9903.05.78, 9903.05.81. Not charged on goods the note exempts (agricultural list, civil aircraft, pharmaceuticals, and every product on a Section 232 list); other exemptions (Canada and Mexico goods that enter free under USMCA, CAFTA-DR textiles, country-specific lists) are not modelled.
- 50% Section 232 since 2026-04-06 — source (9903.82.02)
+50% on articles of steel, derivative steel articles and articles of copper, lists (c)(iii)-(v), chapters 72, 73, 74 and 76, from every country except as listed. Heading 9903.82.02. 'Unless a lower rate applies': the United Kingdom 25% and the 10/15% total-rate headings are listed separately and are not added. Vehicles and vehicle parts on the U.S. note 33 and 38 lists are carved out (they do not stack).
Section 232: what the proclamations say about chapter 73
These are summaries of the official proclamations. Where the tariff schedule notes give a plain percentage for your line and country, it is already in the duty above (see the layer list). Rates that depend on a fact only you know (the share of metal by weight, U.S.-made metal, a country deal, a USMCA claim) are listed but not added. Check your own line against the official list or ask your broker.
Steel, aluminum and copper articles and derivatives in force
- April 2026 proclamation (Proclamation 11021, signed 2026-04-02, effective 2026-04-06 12:01 a.m. EDT): 50% on aluminum and steel articles, most copper articles and certain derivatives (its Annex I-A), 'unless a lower rate of duty applies'; 25% on the rest of the copper articles and derivatives (Annex I-B); United Kingdom 25% (Annex I-A) and 15% (Annex I-B); 10% when the metal was melted and poured, or smelted and cast, in the United States. The duty applies to the full customs value, whatever the metal content.
- June 2026 proclamation (Proclamation 11032, signed 2026-06-01, effective 2026-06-08 12:01 a.m. EDT) modifies it: a 25% base rate for the aluminum and steel articles in its Annex I-C 'unless a lower rate applies'; for Argentina, Ecuador, El Salvador, Guatemala, Japan, Korea, Liechtenstein, Switzerland, Taiwan, the United Kingdom and EU member nations, the general duty plus the Section 232 rate adds up to 15% (nothing is added when the general duty is already 15% or more); 10% on the same basis for derivatives made of United States metal; USMCA goods from Canada and Mexico pay 25% only on the non-U.S. content, with a total of at least 15%; the metal-weight threshold for derivatives falls from 95% to 85%. These rates run to 2027-12-31 11:59 p.m. EST; from 2028-01-01 the rates of the April proclamation's clause (3) return.
- Russia: aluminum that is Russian, or made from Russian aluminum, stays at 200% (Proclamation 10522, kept by clause 8 of Proclamation 11021).
- Cross-check: the USITC tariff schedule in our data (revision 2026HTSRev23) lists the Section 232 headings 9903.82.01 to 9903.82.26, including +50% (9903.82.02), +25% (9903.82.09), +10% (9903.82.06) and 15% (9903.82.10, 9903.82.22), and the United Kingdom and Russia variants. They match the proclamations in kind; the product lists are in U.S. note 16, which we did not read.
- Product lists (added 2026-11-10): read from the USITC HTS 2026HTSRev23 chapter 99 U.S. notes (U.S. note 16(c)(i) to subchapter III of chapter 99, U.S. note 16(c)(ii) to subchapter III of chapter 99, U.S. note 16(c)(iii) to subchapter III of chapter 99, U.S. note 16(c)(iv) to subchapter III of chapter 99, U.S. note 16(c)(ix) to subchapter III of chapter 99, U.S. note 16(c)(v) to subchapter III of chapter 99, U.S. note 16(c)(vi) to subchapter III of chapter 99, U.S. note 16(c)(vii) to subchapter III of chapter 99, U.S. note 16(c)(viii) to subchapter III of chapter 99, U.S. note 16(c)(x) to subchapter III of chapter 99, U.S. note 16(c)(xi) to subchapter III of chapter 99); 742 code prefixes parsed. Plain-percentage rows are in the table; conditional and total-rate headings are listed but not added to totals. Dates marked in each row.
- Product lists (added 2026-11-10): read from the USITC HTS 2026HTSRev23 chapter 99 U.S. notes (U.S. note 16(c)(i) to subchapter III of chapter 99, U.S. note 16(c)(ii) to subchapter III of chapter 99, U.S. note 16(c)(iii) to subchapter III of chapter 99, U.S. note 16(c)(iv) to subchapter III of chapter 99, U.S. note 16(c)(ix) to subchapter III of chapter 99, U.S. note 16(c)(v) to subchapter III of chapter 99, U.S. note 16(c)(vi) to subchapter III of chapter 99, U.S. note 16(c)(vii) to subchapter III of chapter 99, U.S. note 16(c)(viii) to subchapter III of chapter 99, U.S. note 16(c)(x) to subchapter III of chapter 99, U.S. note 16(c)(xi) to subchapter III of chapter 99); 742 code prefixes parsed. Plain-percentage rows are in the table; conditional and total-rate headings are listed but not added to totals. Dates marked in each row.
Read from the proclamation on 2026-11-10. Sources: 91 FR 18201 · 91 FR 34085 · 2026HTSRev23 · Further Strengthening Actions Taken To Adjust Imports of Aluminum (Proclamation of 2026-07-23, 91 FR 46635, FR 2026-14990) exists and was NOT read: aluminum rules may have changed again.
Pending and recent notices for this heading
None of the notices we track names heading 7307 and Bangladesh together. Many notices name only a program or a chapter, so also read all pending notices.