Independent import-duty referenceRates as of 11/22/2026 17:06 EST

All headings › Chapter 84 › 8465

Machine tools (including machines for nailing, stapling, glueing or otherwise… (HTS 8465) duty rate from Mexico

Goods in HTS heading 8465 (Machine tools (including machines for nailing, stapling, glueing or otherwise…) from Mexico pay the general duty in the tariff schedule plus Section 301 10%. Across the 78 lines below the percentage total runs from 12.4% to 13%. Section 232 is added to the totals only where a plain percentage applies to the line and the country (conditional and country-deal rates are listed, not added), we found no IEEPA duty in force, and antidumping duties are not checked here.

Landed-cost calculator

Duty by line

Pick your own 10-digit code from your classification or broker: the rate that applies to you is the one on your line. The last column is the percentage part only, on $10,000 of customs value.

CodeProductGeneral rateAdded dutiesTotal percentageOn $10,000
8465.10.00.05Used or rebuilt › Tenoners2.4%10% Section 30112.4%$1,240.00
8465.10.00.15Used or rebuilt › Other2.4%10% Section 30112.4%$1,240.00
8465.10.00.25Machines which can carry out different types of machining operations without tool change between such operations › Numerically controlled2.4%10% Section 30112.4%$1,240.00
8465.10.00.35Machines which can carry out different types of machining operations without tool change between such operations › Other2.4%10% Section 30112.4%$1,240.00
8465.10.00.45Other › Other2.4%10% Section 30112.4%$1,240.00
8465.10.00.50Machines which can carry out different types of machining operations without tool change between such operations › Other2.4%10% Section 30112.4%$1,240.00
8465.20.10.00Machining centers › For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising3%10% Section 30113%$1,300.00
8465.20.50.00Machining centers › For bending or assembling2.9%10% Section 30112.9%$1,290.00
8465.20.80.00Machining centers › Other2.4%10% Section 30112.4%$1,240.00
8465.91.00.02Used or rebuilt › Rip saws3%10% Section 30113%$1,300.00
8465.91.00.06Used or rebuilt › Panel saws3%10% Section 30113%$1,300.00
8465.91.00.12Used or rebuilt › Band saws3%10% Section 30113%$1,300.00
8465.91.00.16Used or rebuilt › Cross-cut and optimizing saws3%10% Section 30113%$1,300.00
8465.91.00.22Used or rebuilt › Other3%10% Section 30113%$1,300.00
8465.91.00.27Other › Sawmill machines3%10% Section 30113%$1,300.00
8465.91.00.32Sawing machines › Radial arm saws3%10% Section 30113%$1,300.00
8465.91.00.36Sawing machines › Tilting arbor table saws3%10% Section 30113%$1,300.00
8465.91.00.41Sawing machines › Rip saws3%10% Section 30113%$1,300.00
8465.91.00.47Sawing machines › Miter saws3%10% Section 30113%$1,300.00
8465.91.00.49Sawing machines › Scroll saws3%10% Section 30113%$1,300.00
8465.91.00.53Sawing machines › Valued under $3,000 each3%10% Section 30113%$1,300.00
8465.91.00.58Sawing machines › Other3%10% Section 30113%$1,300.00
8465.91.00.64Sawing machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.91.00.68Sawing machines › Other3%10% Section 30113%$1,300.00
8465.91.00.74Sawing machines › Cross-cut and optimizing saws3%10% Section 30113%$1,300.00
8465.91.00.78Sawing machines › Other3%10% Section 30113%$1,300.00
8465.91.00.91Sawing machines › Other3%10% Section 30113%$1,300.00
8465.92.00.03Used or rebuilt › Moulders3%10% Section 30113%$1,300.00
8465.92.00.06Used or rebuilt › Routers3%10% Section 30113%$1,300.00
8465.92.00.16Used or rebuilt › Other3%10% Section 30113%$1,300.00
8465.92.00.26Planing, milling or molding (by cutting) machines › Valued under $3,000 each3%10% Section 30113%$1,300.00
8465.92.00.29Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.92.00.31Other › Moulders3%10% Section 30113%$1,300.00
8465.92.00.34Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.92.00.37Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.92.00.42Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.92.00.46Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.92.00.51Planing, milling or molding (by cutting) machines › Valued under $3,000 each3%10% Section 30113%$1,300.00
8465.92.00.55Planing, milling or molding (by cutting) machines › Numerically controlled3%10% Section 30113%$1,300.00
8465.92.00.58Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.92.00.62Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.92.00.66Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.92.00.72Other › Other3%10% Section 30113%$1,300.00
8465.92.00.91Planing, milling or molding (by cutting) machines › Other3%10% Section 30113%$1,300.00
8465.93.00.04Used or rebuilt › Belt sanders, for a belt width 60 cm or wider3%10% Section 30113%$1,300.00
8465.93.00.12Used or rebuilt › Other3%10% Section 30113%$1,300.00
8465.93.00.30Grinding, sanding or polishing machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.93.00.45Grinding, sanding or polishing machines › Valued $1,000 or over but under $3,000 each3%10% Section 30113%$1,300.00
8465.93.00.55Grinding, sanding or polishing machines › Other3%10% Section 30113%$1,300.00
8465.93.00.65Other › Belt sanders, for a belt width 60 cm or wider3%10% Section 30113%$1,300.00
8465.93.00.75Other › Other3%10% Section 30113%$1,300.00
8465.93.00.91Grinding, sanding or polishing machines › Other3%10% Section 30113%$1,300.00
8465.94.00.05For woodworking › Used or rebuilt2.9%10% Section 30112.9%$1,290.00
8465.94.00.15Bending or assembling machines › Doweling machines2.9%10% Section 30112.9%$1,290.00
8465.94.00.25Bending or assembling machines › Edgebanding machines2.9%10% Section 30112.9%$1,290.00
8465.94.00.35Bending or assembling machines › Laminating machines2.9%10% Section 30112.9%$1,290.00
8465.94.00.45Bending or assembling machines › Cold2.9%10% Section 30112.9%$1,290.00
8465.94.00.55Bending or assembling machines › Other2.9%10% Section 30112.9%$1,290.00
8465.94.00.65Bending or assembling machines › Other2.9%10% Section 30112.9%$1,290.00
8465.94.00.91Bending or assembling machines › Other2.9%10% Section 30112.9%$1,290.00
8465.95.00.05Used or rebuilt › Numerically controlled boring machines3%10% Section 30113%$1,300.00
8465.95.00.10Used or rebuilt › Other3%10% Section 30113%$1,300.00
8465.95.00.20Drilling or mortising machines › Numerically controlled3%10% Section 30113%$1,300.00
8465.95.00.35Drilling or mortising machines › Valued under $3,000 each3%10% Section 30113%$1,300.00
8465.95.00.45Drilling or mortising machines › Other3%10% Section 30113%$1,300.00
8465.95.00.55Drilling or mortising machines › Valued under $1,000 each3%10% Section 30113%$1,300.00
8465.95.00.60Drilling or mortising machines › Other3%10% Section 30113%$1,300.00
8465.95.00.65Other › Other3%10% Section 30113%$1,300.00
8465.95.00.91Drilling or mortising machines › Other3%10% Section 30113%$1,300.00
8465.96.00.15For woodworking › Log splitters2.4%10% Section 30112.4%$1,240.00
8465.96.00.25For woodworking › Chippers2.4%10% Section 30112.4%$1,240.00
8465.96.00.30For woodworking › Hogs2.4%10% Section 30112.4%$1,240.00
8465.96.00.40For woodworking › Other2.4%10% Section 30112.4%$1,240.00
8465.96.00.51Splitting, slicing or paring machines › Other2.4%10% Section 30112.4%$1,240.00
8465.99.02.10Woodworking machines › Debarkers2.4%10% Section 30112.4%$1,240.00
8465.99.02.20Woodworking machines › Lathes2.4%10% Section 30112.4%$1,240.00
8465.99.02.30Woodworking machines › Other2.4%10% Section 30112.4%$1,240.00
8465.99.02.50Other › Other2.4%10% Section 30112.4%$1,240.00

What is and is not counted

LayerStatusNote
General (column 1) dutyIncludedUSITC Harmonized Tariff Schedule 2026HTSRev23
Section 301Included where a rule in our table appliesChina's older lists (Lists 1, 2, 3, 4A and the 2024 four-year-review increases) are loaded by product code with the exclusions now in force; the 2026 country action is loaded by country, with set totals for the EU, Japan, South Korea, Switzerland and Taiwan. Country-specific exemption lists (USMCA goods, CAFTA-DR textiles, UK and EU lists) are not modelled. Confirm each line with a broker. USTR: Section 301 investigations · USITC Harmonized Tariff Schedule, chapter 99
Section 232Partly included: plain-percentage rows are added, conditional and country-deal rates are shown but not addedPlain-percentage rows from the USITC chapter 99 notes are added, one row per line (vehicles and parts ahead of metals ahead of wood); conditional and country-deal rates are listed, not added. Light-vehicle parts and truck parts are both 25% and the schedule does not say whether a part on both lists pays once or twice: the site shows one. Official source: CBP: Section 232 steel and aluminum FAQs · Commerce (BIS): Section 232 investigations
IEEPA / reciprocalChecked: none in force foundWe found no IEEPA or reciprocal duty in force. The nine IEEPA tariff actions named in Executive Order 14389 were ended by it (signed 2026-02-20), and the temporary 10% Section 122 surcharge that followed was set to expire on 2026-07-24 with no extension found in the Federal Register. A Section 301 action that began on 2026-07-24 is counted in the Section 301 layer above. Canada has a separate Section 338 duty on some products; we cannot say which lines. Official source: Federal Register: Executive Order 14389, Ending Certain Tariff Actions · Federal Register: Proclamation 11012, temporary import surcharge · CBP: IEEPA tariff FAQs
Antidumping / countervailing (AD/CVD)None found in our listNone found in our list of 757 orders; the list can miss orders newer than their first review notice. Official source: CBP: antidumping and countervailing duty · Commerce (ITA): ACCESS case search · CBP: AD/CVD case data and search · Commerce: ADCVD proceedings

Rules applied to Mexico

Section 232: what the proclamations say about chapter 84

These are summaries of the official proclamations. Where the tariff schedule notes give a plain percentage for your line and country, it is already in the duty above (see the layer list). Rates that depend on a fact only you know (the share of metal by weight, U.S.-made metal, a country deal, a USMCA claim) are listed but not added. Check your own line against the official list or ask your broker.

Semiconductors (certain advanced chips) in force

  • Federal Register document 2026-01052 (published 2026-01-20). USITC HTS 2026HTSRev23, U.S. note 39 and headings 9903.79.01 to 9903.79.09. +25% (heading 9903.79.01) on semiconductor articles of 8471.50, 8471.80 and 8473.30 that are a logic integrated circuit, or contain one, within two stated performance ranges (note 39(b)). Other products in those codes pay nothing extra (9903.79.02); so do chips for U.S. data centers, repairs, research, start-ups, consumer electronics, civil industrial use and public-sector use (9903.79.03 to .09). The schedule does not list heading 8542 chips.
  • Product list (added 2026-11-21): 3 code prefixes parsed from note 39(b). The performance ranges and uses cannot be read from the product code, so the row is listed and not added to totals.

Read from the proclamation on 2026-11-21. Sources: Federal Register document 2026-01052

Pending and recent notices for this heading

None of the notices we track names heading 8465 and Mexico together. Many notices name only a program or a chapter, so also read all pending notices.