Tariff Changes

All headings › Chapter 84 › 8482

Ball or roller bearings, and parts thereof (HTS 8482) duty rate from China

Goods in HTS heading 8482 (Ball or roller bearings, and parts thereof) from China pay the general duty in the tariff schedule plus Section 301 25% and Section 232 25% and Section 301 12.5%. Across the 56 lines below the percentage total runs from 41.9% to 59%. Section 232 is added to the totals only where a plain percentage applies to the line and the country (conditional and country-deal rates are listed, not added), we found no IEEPA duty in force, and antidumping duties are not checked here.

Landed-cost calculator

Duty by line

Pick your own 10-digit code from your classification or broker: the rate that applies to you is the one on your line. The last column is the percentage part only, on $10,000 of customs value.

CodeProductGeneral rateAdded dutiesTotal percentageOn $10,000
8482.10.10.40Ball bearings with integral shafts › Bearings having an outside diameter not over 30 mm2.4%25% Section 301
25% Section 232
52.4%$5,240.00
8482.10.10.80Ball bearings with integral shafts › Other2.4%25% Section 301
25% Section 232
52.4%$5,240.00
8482.10.50.04Other › Unground bearings9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.08Other › Thrust bearings9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.12Other › Linear bearings9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.16Other › Flanged9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.24Other › Other9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.28Other › Other9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.32Other › Maximum or full capacity type9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.36Other › Under 9 mm9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.44Other › 9 mm and over but not over 30 mm9%25% Section 301
25% Section 232
59%$5,900.00
8482.10.50.48Other › Over 30 mm but not over 52 mm9%25% Section 301
25% Section 232
59%$5,900.00
8482.10.50.52Other › Over 52 mm but not over 100 mm.9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.56Other › Over 100 mm9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.60Other › Double row ball bearings9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.64Other › Other9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.10.50.68Other › Other9%12.5% Section 301
25% Section 301
46.5%$4,650.00
8482.20.00.20Wheel hub units › Flanged5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.30Wheel hub units › Other5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.40Other › With cups having an outside diameter not exceeding 102 mm5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.61Other › With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.64Other › With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.20.00.67Other › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.20.00.70Cone assemblies entered separately › For cups having an outside diameter not exceeding 102 mm5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.81Cone assemblies entered separately › For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.20.00.90Cone assemblies entered separately › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.30.00.40Spherical roller bearings › Single row5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.30.00.80Spherical roller bearings › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.40.00.00Ball or roller bearings, and parts thereof › Needle roller bearings, including cage and needle roller assemblies5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.50.00.00Ball or roller bearings, and parts thereof › Other cylindrical roller bearings, including cage and roller assemblies5.8%25% Section 301
25% Section 232
55.8%$5,580.00
8482.80.00.20Other, including combined ball/roller bearings › Combined ball and spherical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.80.00.40Other, including combined ball/roller bearings › Combined ball and needle roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.80.00.60Other, including combined ball/roller bearings › Combined ball and other cylindrical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.80.00.80Other, including combined ball/roller bearings › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.91.00.10Balls › Of alloy steel4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.15Balls › Of copper or copper alloys as described in statistical note 8 to this chapter4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.30Balls › Other4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.40Balls, needles and rollers › Needles4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.50Balls, needles and rollers › Tapered rollers4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.70Balls, needles and rollers › Spherical rollers4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.80Balls, needles and rollers › Other cylindrical rollers4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.91.00.90Balls, needles and rollers › Other4.4%12.5% Section 301
25% Section 301
41.9%$4,190.00
8482.99.05.00Inner or outer rings or races › For ball bearings9.9%12.5% Section 301
25% Section 301
47.4%$4,740.00
8482.99.15.50Cups › Having an outside diameter not exceeding 203 mm5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.15.70Cups › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.15.80For tapered roller bearings › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.25.20Other › For spherical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.25.40Other › For needle bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.25.60Other › For other cylindrical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.25.80Other › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.35.00Other › Parts of ball bearings (including parts of ball bearings with integral shafts)9.9%12.5% Section 301
25% Section 301
47.4%$4,740.00
8482.99.45.00Other › Parts of tapered roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.65.10Other › For spherical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.65.30Other › For needle bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.65.60Other › For other cylindrical roller bearings5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00
8482.99.65.95Other › Other5.8%12.5% Section 301
25% Section 301
43.3%$4,330.00

What is and is not counted

LayerStatusNote
General (column 1) dutyIncludedUSITC Harmonized Tariff Schedule 2026HTSRev23
Section 301Included where a rule in our table appliesChina's older lists (Lists 1, 2, 3, 4A and the 2024 four-year-review increases) are loaded by product code with the exclusions now in force; the 2026 country action is loaded by country, with set totals for the EU, Japan, South Korea, Switzerland and Taiwan. Country-specific exemption lists (USMCA goods, CAFTA-DR textiles, UK and EU lists) are not modelled. Confirm each line with a broker. USTR: Section 301 investigations · USITC Harmonized Tariff Schedule, chapter 99
Section 232Partly included: plain-percentage rows are added, conditional and country-deal rates are shown but not addedPlain-percentage rows from the USITC chapter 99 notes are added, one row per line (vehicles and parts ahead of metals ahead of wood); conditional and country-deal rates are listed, not added. Light-vehicle parts and truck parts are both 25% and the schedule does not say whether a part on both lists pays once or twice: the site shows one. Official source: CBP: Section 232 steel and aluminum FAQs · Commerce (BIS): Section 232 investigations
IEEPA / reciprocalChecked: none in force foundWe found no IEEPA or reciprocal duty in force. The nine IEEPA tariff actions named in Executive Order 14389 were ended by it (signed 2026-02-20), and the temporary 10% Section 122 surcharge that followed was set to expire on 2026-07-24 with no extension found in the Federal Register. A Section 301 action that began on 2026-07-24 is counted in the Section 301 layer above. Canada has a separate Section 338 duty on some products; we cannot say which lines. Official source: Federal Register: Executive Order 14389, Ending Certain Tariff Actions · Federal Register: Proclamation 11012, temporary import surcharge · CBP: IEEPA tariff FAQs
Antidumping / countervailing (AD/CVD)3 may applyAntidumping and countervailing duty orders that MAY apply (3):
  1. A-570-601 · AD · China · Tapered Roller Bearings and Parts Thereof, Finished or Unfinished · official notice
  2. A-570-082 · AD · China · Certain Steel Wheels · official notice
  3. C-570-083 · CVD · China · Certain Steel Wheels · official notice
The order's scope decides, not the tariff code; confirm with your broker or the official case page. Official source: CBP: antidumping and countervailing duty · Commerce (ITA): ACCESS case search · CBP: AD/CVD case data and search · Commerce: ADCVD proceedings

Rules applied to China

Section 232: what the proclamations say about chapter 84

These are summaries of the official proclamations. Where the tariff schedule notes give a plain percentage for your line and country, it is already in the duty above (see the layer list). Rates that depend on a fact only you know (the share of metal by weight, U.S.-made metal, a country deal, a USMCA claim) are listed but not added. Check your own line against the official list or ask your broker.

Semiconductors (certain advanced chips) in force

  • Federal Register document 2026-01052 (published 2026-01-20). USITC HTS 2026HTSRev23, U.S. note 39 and headings 9903.79.01 to 9903.79.09. +25% (heading 9903.79.01) on semiconductor articles of 8471.50, 8471.80 and 8473.30 that are a logic integrated circuit, or contain one, within two stated performance ranges (note 39(b)). Other products in those codes pay nothing extra (9903.79.02); so do chips for U.S. data centers, repairs, research, start-ups, consumer electronics, civil industrial use and public-sector use (9903.79.03 to .09). The schedule does not list heading 8542 chips.
  • Product list (added 2026-11-21): 3 code prefixes parsed from note 39(b). The performance ranges and uses cannot be read from the product code, so the row is listed and not added to totals.

Read from the proclamation on 2026-11-21. Sources: Federal Register document 2026-01052

Pending and recent notices for this heading

None of the notices we track names heading 8482 and China together. Many notices name only a program or a chapter, so also read all pending notices.